IPBUF安全漏洞报告
English
CVE-2025-14303 CVSS 6.8 中危

CVE-2025-14303: MSI主板IOMMU未正确启用导致内存读写漏洞

披露日期: 2025-12-17

漏洞信息

漏洞编号
CVE-2025-14303
漏洞类型
保护机制失败
CVSS评分
6.8 中危
攻击向量
物理 (AV:P)
认证要求
无需认证 (PR:N)
用户交互
无需交互 (UI:N)
影响产品
MSI主板

相关标签

CVE-2025-14303IOMMUDMA攻击MSI主板物理访问攻击保护机制失败固件漏洞内存读写漏洞PCIe安全Thunderbolt攻击

漏洞概述

CVE-2025-14303是微星科技(MSI)部分主板型号存在的安全漏洞,属于保护机制失败类型。该漏洞的根本原因在于IOMMU(输入输出内存管理单元)未正确启用,导致系统无法有效隔离和限制DMA(直接内存访问)设备的内存访问范围。由于IOMMU的缺失或配置不当,具有DMA功能的PCIe设备可以在操作系统内核加载之前,绕过安全检查直接访问物理内存的任意位置。攻击者利用此漏洞可以读取敏感数据(如加密密钥、密码、认证令牌等),修改系统固件或引导加载程序,甚至在操作系统启动前执行恶意代码。此漏洞需要攻击者具备物理访问权限,但无需认证即可实施攻击,对系统的机密性、完整性和可用性均造成严重影响。

技术细节

IOMMU(Input-Output Memory Management Unit)是现代计算机系统中用于保护DMA安全的硬件机制。正常情况下,IOMMU会将来自外部设备的DMA请求映射到合法的内存区域,防止设备访问未授权的物理内存地址。当IOMMU未正确启用时,DMA-capable PCIe设备可以绕过操作系统层面的访问控制,直接读写物理内存。攻击者可以利用支持DMA的设备(如Thunderbolt接口设备、PCIe调试卡或定制的攻击硬件)在系统启动早期阶段(操作系统内核加载前)进行攻击。此时系统安全机制(如ASLR、DEP、内核隔离等)尚未生效,攻击者可以访问整个物理地址空间。常见的攻击场景包括:1) 通过DMA读取物理内存获取敏感信息;2) 修改UEFI固件变量或引导程序;3) 映射内核内存区域并植入恶意代码;4) 绕过BitLocker等全磁盘加密机制(通过获取密钥)。该漏洞的CVSS向量为CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H,表明攻击复杂度低且影响范围广。

攻击链分析

STEP 1
步骤1
攻击者获得目标系统的物理访问权限
STEP 2
步骤2
确认目标系统使用MSI主板且IOMMU未正确启用或配置
STEP 3
步骤3
攻击者连接具有DMA功能的PCIe设备(如Thunderbolt设备、PCIe调试卡或定制的DMA攻击硬件)
STEP 4
步骤4
在系统启动早期阶段(UEFI/BIOS加载后、操作系统内核启动前)触发DMA访问
STEP 5
步骤5
利用IOMMU缺失或配置不当的漏洞,直接读取任意物理内存地址,提取敏感信息如加密密钥、密码或认证令牌
STEP 6
步骤6
可选:修改系统固件、引导加载程序或内核内存,植入持久化后门或恶意代码
STEP 7
步骤7
利用获取的敏感信息进行后续攻击,如绕过全磁盘加密、横向移动或权限提升

PoC / 利用代码

⚠️ 仅供安全研究
以下代码仅用于安全研究和授权测试,未经授权使用属于违法行为。
PoC
#!/usr/bin/env python3 """ CVE-2025-14303 PoC - DMA Memory Access via Insecure IOMMU Note: This is a conceptual PoC for educational purposes only. Requires physical access and DMA-capable hardware. """ import os import sys import struct def check_iommu_status(): """Check if IOMMU is enabled in the system""" try: with open('/sys/kernel/debug/vfio/iommu', 'r') as f: content = f.read() if 'IOMMU not enabled' in content or not content.strip(): return False return True except: # Alternative check via dmesg try: dmesg = os.popen('dmesg | grep -i iommu').read() return 'IOMMU enabled' in dmesg or 'AMD-Vi' in dmesg or 'Intel VT-d' in dmesg except: return None def dma_read_memory(address, length): """ Simulate DMA read operation (requires DMA-capable device) In real attack, this would use PCIe device with DMA capability """ print(f"[*] Attempting DMA read at physical address: 0x{address:016x}") print(f"[*] Reading {length} bytes...") # In actual implementation, this would: # 1. Use PCIe device with DMA capability # 2. Configure device to perform bus master DMA # 3. Read data from physical memory directly # This typically requires custom hardware/firmware or tools like pcileech return None def scan_physical_memory(): """ Scan physical memory for sensitive data Looking for: encryption keys, passwords, boot sectors """ print("[*] Scanning physical memory for sensitive data...") # Known memory regions to check: # - 0x00000000-0x00010000: IVT (Interrupt Vector Table) # - BIOS/UEFI region: typically 0xE0000-0xFFFFF # - ACPI tables: varies by system # - Kernel memory: typically starts at 0x100000 regions = [ (0x0, 0x10000, "Low memory / IVT"), (0x100000, 0x400000, "Early kernel memory"), ] for start, end, name in regions: print(f"[*] Checking {name}: 0x{start:08x}-0x{end:08x}") # In real attack, perform actual DMA reads here # Check for patterns indicating sensitive data pass def main(): print("="*60) print("CVE-2025-14303 - MSI IOMMU Bypass PoC") print("="*60) if os.geteuid() != 0: print("[!] This PoC requires root privileges") sys.exit(1) print("\n[*] Checking IOMMU status...") iommu_enabled = check_iommu_status() if iommu_enabled: print("[+] IOMMU is enabled - system may be protected") print("[*] However, IOMMU misconfiguration could still exist") elif iommu_enabled is False: print("[-] IOMMU is NOT enabled - vulnerable to CVE-2025-14303") print("[*] DMA-capable devices can access arbitrary physical memory") else: print("[?] Could not determine IOMMU status") print("\n[*] Note: Actual exploitation requires:") print(" - Physical access to target system") print(" - DMA-capable PCIe device (e.g., PCIe debug card, Thunderbolt device)") print(" - Tools like pcileech, Inception, or custom DMA firmware") print(" - Attack must occur before OS kernel security features load") if __name__ == "__main__": main()

影响范围

MSI主板(部分型号,IOMMU未正确启用)
固件版本:未启用IOMMU或IOMMU配置不当的版本

防御指南

临时缓解措施
临时缓解措施:在BIOS/UEFI设置中启用IOMMU(Intel VT-d或AMD-Vi)功能,并确保其正确配置。检查系统启动日志确认IOMMU已成功初始化。对于无法立即更新的系统,应限制物理访问权限,监控Thunderbolt等DMA接口设备的使用,并考虑在不使用时禁用相关接口。同时,启用Secure Boot和全磁盘加密以增加攻击难度,但需注意在系统启动早期阶段(OS内核加载前)的攻击仍可能绕过这些保护机制。

参考链接

快速导航: 前沿安全 最新收录域名列表 最新威胁情报列表 最新网站排名列表 最新工具资源列表 最新CVE漏洞列表